Testing Standards For Climbing Helmets
Jan 08, 2026
Leave a message
The CE and UIAA standards have four requirements:
Direct Impact Test: A 5 kg blunt-tipped weight (5 cm radius) is dropped from a height of 2 meters onto the top of the helmet. The impact force on the dummy's (wooden) neck must be less than 8 kN (UIAA standard) and less than 10 kN (CE standard). One thousand Newtons is approximately equal to 100 kgf (9.8 Newtons = 1 kgf). In other words, the impact force on the dummy's neck must be less than 800 kgf (UIAA standard) and less than 1000 kgf (CE standard).
Side Impact Test: At a 60-degree angle to the front (top of the head), a blunt-tipped weight is dropped from a height of 50 cm. The impact force on the dummy's neck must be less than 8 kN (UIAA standard) and less than 10 kN (CE standard).
Side Impact Test: A blunt-tipped weight is dropped from a height of 50 cm at a 60-degree angle to the front, two sides, and a rear. The impact force on the dummy's neck must be less than 8 kN (UIAA standard) and less than 10 kN (CE standard). Sharp Object Penetration Test: A 3 kg cone-shaped object (0.5 mm tip) is dropped from a height of 2 meters. The helmet must withstand at least one such impact. The helmet is allowed to be damaged, but the sharp object must not directly contact the scalp.
Stability Test (also called Forward/Backward Displacement Test): A 10 kg weight is dropped onto the helmet from the front and rear. The helmet must remain securely on the dummy's head (the angle of displacement after impact is recorded during the test).
Note: Points 1 and 2 of the test standard are important. Here, the sensor measures the impact force on the neck. This indicates that the helmet must not only be impact-resistant but also have the ability to absorb kinetic energy and mitigate impact, similar to a dynamic rope. The helmet's shock absorption function aims to minimize the impact on the wearer's cervical and spinal vertebrae.
Secondly, note point 3 of the test standard. Although this is a one-time "pass/fail" test, a good mountaineering helmet (such as the HB Dyneema) can withstand 10 such impacts. Durability is especially valuable for extended mountaineering expeditions or large rock face work. Unlike regular rock climbing, where you can simply buy a new helmet back in town if it gets damaged, in mountaineering, you can't just make do with helmets from other sports. False safety claims can lead to unforeseen consequences.
Bicycle and rollerblading helmets at least don't meet the third requirement of the mountaineering helmet standard.
Construction site safety helmets certainly don't meet the fourth requirement.

